NEC Express5800 User Manual page 164

7-10 Maintenance
7.
Follow the guideline shown at the bottom of the screen, and press Esc.
The [Enduser Menu] below is displayed.
– <Test Result>
Shows the diagnostics completion screen of the above diagnostics.
– <Device List>
Shows a list of connected devices.
– <Log Info>
Shows the log information of the diagnostics. It can be saved on a floppy disk. To
save it on a floppy disk, insert a formatted floppy disk to the floppy disk drive, and
select <Save(F)>.
– <Option>
Optional features can be used from this menu.
– <Reboot>
Reboots the system.
8.
Select <Reboot> in the [Enduser Menu] above.
The server restarts and the system is started from the NEC EXPRESSBUILDER.
9.
Exit the NEC EXPRESSBUILDER, and remove the CD-ROM from the DVD-ROM
drive.
10.
Power off the server and unplug the power cord from the receptacle.
11.
Reconnect all the LAN cables that have been disconnected in Step 2 to the server.
12.
Plug the power cord.
This completes the system diagnostics.