Problems With Master Control Menu; Collecting Event Log - NEC Express5800 User Manual

Problems with Master Control Menu

The master control menu fails to appear:
Is your system Windows NT 4.0 or later, or Windows 95 or later?
→ The CD-ROM Autorun feature is supported by Windows NT 4.0 and Windows 95.
The older versions do not automatically start from the CD-ROM.
Is Shift pressed?
→ Setting the CD-ROM with Shift pressed down cancels the Autorun feature.
Is the system in the proper state?
→ The menu may not appear depending on the system registry setting or the timing
to set the CD-ROM. In such a case, start the Explorer and run \MC\1ST.EXE in
the CD-ROM.

Collecting Event Log

This section describes on how to collect the log of various events that occurred on the server.
IMPORTANT:
the procedure below after restarting the system.
1.
Click [Management Tool] → [Event Viewer] from the Control Panel.
2.
Select the type of the log to collect.
On [Application Log], the events related to the running application is archived. On
[Security Log], the events related to the security is archived. On [System Log], the events
occurred at the item which configures Windows system is archived.
3.
Click [Save as...] in the [Run] menu.
4.
Input the file name of archived log in the [File Name] box.
5.
Select the type of the log file you want to save in the [File Type] list box and click [OK].
For more information, refer to Windows Online Help.
If STOP error, system error, or stall occurred, follow
Troubleshooting 8-21