NEC Express5800 User Manual page 283

13.
Insert Microsoft Windows Server 2003 R2 DISC 2 CD-ROM into the DVD-ROM drive.
Confirm the parameters and click [OK].
14.
When the installation has completed, remove Microsoft Windows Server 2003 R2 DISC 2
CD-ROM from the DVD-ROM drive, and restart the system.
15.
Update the system.
16.
Install the driver and make detailed settings.
– SCSI controller (N8103-95)
If your system has a controller (N8103-95), following message often appears on the
display during the upgrade installation to Windows Server 2003.
Please type D:/i386 and click OK. (D: CD-Drive)
Insert disk
The file 'adpu160m.sys' on Adaptec Windows 2000 Family Manager set V1.12 S2 is needed.
Type the path where the file is located, and then click OK.
– If PROSet is already installed, uninstall the PROSet before upgrading.
If the teaming function is enabled, disable the function before uninstalling PROSet.
– When upgrade installation is completed, [Device Driver Wizard] dialog box may
appear.
If it appears, click Cancel, then update the system.
Installing Windows Server 2003 E-11