Dvd-Rom Drive - NEC Express5800 User Manual

2-20 General Description

DVD-ROM Drive

The server is provided with the DVD-ROM drive on its front to read data from a disc.
Setting and Removing the Disc
1.
Make sure that the power of the server is on (with the POWER/SLEEP lamp being lit in
green) before setting the disc on the DVD-ROM drive.
2.
Press the Open/Close button on the front of the DVD-ROM drive.
The tray comes out.
3.
Put the disc on the tray carefully and securely with the character printed surface facing
upward.
4.
Press the Open/Close button or gently push on the tray front.
The tray is automatically retracted into the DVD-ROM drive.
IMPORTANT: If a noisy sound in driving the DVD-ROM drive occurs
after setting a disc, set it again correctly.
To take out the disc from the DVD-ROM drive, press the Open/Close button in the similar way in
setting the disc to make the tray go out. If the access LED is lit in orange, the disc is being accessed.
Confirm that the access LED is not lit before pressing the Open/Close button.
Your OS may have a command to eject the tray.
When you have taken out the disc, retract the tray back in place.
Observe the following instructions to use the server safely. Failure to follow
these instructions may cause a fire, personal injury, or property damage. See
pages 1-3 to 1-8 for details.
Do not leave the tray ejected from the DVD-ROM drive.
Take off the headphone before you plug in the headphone jack.
CAUTION