NEC Express5800 User Manual page 279

7.
Select the proper SCSI Adapter and press Enter.
– Promise SuperTrak EX8350/8300 Controller-Intel x86 platform
(When N8103-101 board is installed.)
– Promise SuperTrak EX4350 Controller-Intel x86 platform
(When N8103-103 board is installed.)
– LSI MegaRAID Software RAID (Windows XP/2003)
(When LSI Logic Embedded MegaRAID is used)
8.
When the following message is shown, press Enter to start "Welcome to Setup".
9.
When the installation of Windows Server 2003 has finished, the system reboots
automatically.
– Windows Server 2003 has installed: Go on the step 13.
– Windows Server 2003 R2 has installed: Go on the step 10.
10.
When Windows Server 2003 R2 has been installed, the [Windows Setup] screen will be
displayed after logged on to the system.
IMPORTANT:
In this case, the [Windows setup] screen may not be displayed.
Be sure to install Microsoft Windows Server 2003 R2 DISC 2
according to the following procedures.
You can install Microsoft Windows Server 2003 R2 DISC 2 after
the application of "System update".
Be sure to install Microsoft Windows Server 2003 R2 DISC 2.
In this case, note that the [Windows setup] screen is not displayed.
11.
Insert Microsoft Windows Server 2003 R2 DISC 2 CD-ROM into the DVD-ROM drive.
Confirm the parameters and click [OK].
Installing Windows Server 2003 E-7