Driver Installation And Advanced Settings; Proset - NEC Express5800 User Manual

DRIVER INSTALLATION AND ADVANCED SETTINGS

This section describes on how to install and setup various standard drivers mounted on the device.
For the information on installing and setting up the driver that is not described in this section, please
refer to the document attached to the driver.

PROSet

PROSet is a utility that confirms the function of network contained in network driver. Be sure to
install. Utilizing PROSet enables the following issues:
Confirm detailed information of the adapter.
Diagnose loop back test, packet transmission test and so on.
Specify teaming.
Configuring several network adapters as one team provides the server an environment tolerant on
any trouble and enhance through put between the switches.
PROSet is necessary to utilize these features.
NOTE:
situation.
Please restart the Windows Management Instrumentation (WMI)
Service by the following procedure.
"This Software requires the Windows Management Instrumentation Service.
This service is not currently running.
Please start the Service."
Windows Management Instrumentation (WMI) Service restart
procedure
1. When [Intel(R) PRO Network Connections Information] windows is
displayed, click [OK].
2. Click [Finish] at [Intel(R) PRO Network Connections - Installshield
Wizard].
3. Right-click [My Computer] and choose [Manage].
4. Open [Services and Applications] and click [Services].
5. In the Services list, choose [Windows Management Instrumentation]
and right-click to open [Properties].
6. Point to [General] tab.
7. Make sure the [Service] status are [Started].
8. Click [Apply].
9. Click [OK].
The following message will be displayed depending on some
Installing Windows 2000 F-9