NEC Express5800 User Manual page 128

5-20 Installing the Operating System with Express Setup
Installing SCSI Controller Driver (N8103-75/95)
If you utilize SCSI controller driver (N8103-75/95), update your system with NEC
EXPRESSBUILDER CD-ROM attached to your system.
The SCSI controller driver will be installed automatically.
Notes of N8103-75
After installing OS, the driver does not installed according to the method of installing OS
occasionally.
In that case, please install the driver by the following procedures.
1.
Start [Device Manager] from [Start] menu → [Control Panel] → [Administrative Tools]→
[Computer Management].
2.
Double-click the SCSI Controller driver which Device Manager lists as Other device.
3.
Click [Update Driver].
4.
When the "Update Device Driver Wizard" appears, select "Install from a list or specific
location [Advanced]" and click [Next].
5.
Select "Don't search. I will choose the driver to install" and click [Next].
6.
Click [Have Disk..].
– When the floppy disk drive is installed.
Insert "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" into the
floppy disk drive, enter "a:\" into "copy manufacturer's file from:" and click [OK].
– When the floppy disk drive is not installed.
Insert the NEC EXPRESSBUILDER CD-ROM into the DVD-ROM drive, enter
"<DVD-ROM drive Letter>:\WINNT\OEMFD\DOTNET\FD1" into "copy
manufacturer's file from:" and click [OK].
7.
Specify the [Adaptec SCSI Card 29320ALP -Ultra320 SCSI] and click [Next].
The installation of the driver is completed.
Restart the system according to the message appeared on the screen.