NEC Express5800 User Manual page 105

Setting Hot Spare
1.
Install a hard disk drive to be used as hot spare, and then turn on the server.
2.
Run LSI Logic Software RAID Setup Utility.
3.
Select [Objects] → [Physical Drive] from the TOP menu.
The [Objects - PHYSICAL DRIVE SELECTION MENU] screen appears.
4.
Move the cursor onto the hard disk drive to be used as hot spare and press Enter.
5.
The [Port #X] screen appears. Select [Make HotSpare].
6.
A confirmation screen appears. Select "Yes".
The hard disk drive indication is changed to [HOTSP].
Install a hard disk drive
Run LSI Logic Software RAID Setup Utility
Set for hot spare.
Exit LSI Logic Software RAID Setup Utility
Configuring Your Server 4-43