Installation
Unpacking
Remove the unit from its shipping container and ensure that the following items are removed before
discarding the packaging materials:
1. Thermo Scientific TII unit
2. Drain Water Tubing. Approximately 6 ft. (1.83 m) of 1/4" (0.64 cm) O.D. drain tubing
(TU1190X12) with no fittings (Fig 3-1)
3. Feed Water Tubing. Approximately 10 ft. (3.05 m) of 3/8" (0.95 cm) O.D. feed water tubing
provided with a quick disconnect insert on one end and a 1/4" NPT fitting on other end
(TU1119X7) (Fig 3-2)
4. Reservoir Connection Tubing. Two approximately 10 ft. of 3/8" O.D. tubes (TU550X5) for
fluidically connecting the unit to the storage reservoir (Fig 3-3).
5. Model D14041 only: Membrane Reject 1 to Membrane Feed 2 tube
6. Four power cords: one of which is pictured in Figure 3-4 with fuses.
7. UV lamp (LMX13)
8. Tube removal tool (AYX23): shown in Figure 3-5.
9. Wall Bracket - Unit (BC1190X12)
10. Wall Bracket - Remote Display (BC1190X10), shown in Figure 3-6.
11. Display Cable (WH1403X4)
12. Blank Display (DL1190X18), shown in Figure 3-6.
13. RO Membrane (FL1265X1) - Model D14041 has two membranes.
14. Quick Reference Guide (LTX112)
Figure 3-6 Control Panel Accessories:
Also required for installation (purchased separately):
1. A storage reservoir. If a Thermo Scientific TII storage reservoir (D14061, D14062, D14063,
D14064, D14071, D14072, D14073 or D14074) is also purchased, see contents in separate
box.
2. Start-up kit (D502138). Contains the Thermo Scientific TII DI Cartridge Pack (with 0.2 μM
final filter) (D502137), 1 μM Pre-filter (D502113), MPS Cartridge (D502114), Extruded
Carbon Cartridge (D502115), and Cartridge Block (BK1404X2).
3. Customer-supplied fasteners to mount unit and remote display.
4. Household bleach for the cleaning process.
3-2
TII Water System
(Left) Blank Display (DL1190X18), (Right) Control Panel Wall Mount Bracket
Thermo Scientific