Product Information
TII Water Specifications
Types
Iron (total as Fe)
Silica
1
1500 ppm NaCl feed water solution @ 25 °C (77 °F), @ 4.5 bar (65 psig), 15% recovery. Flow rate
and recovery will decrease with lower water temperature and pressure. We recommend the use of a
hot water mixing valve before the RO system for water cooler than 15 °C (59 °F). Feed water
suitability must be determined by a water analysis.
Table 2-2 RO System
Model
D14031
D14041
Table 2-3 Membrane Performance
Inorganic (minimum)
Inorganic (typical)
Particles
Bacteria
Organics (>300 MW)
2
500 ppm NaCl feed water solution @ 25 °C (77 °F), @ 4.5 bar (65 psig), 15% recovery. Flow rate
and recovery will decrease with lower water temperature and pressure. The use of a hot water mixing
valve before the RO system is recommended for water cooler than 15 °C (59 °F).
Table 2-4 DI Product Water Quality (dispensed from unit)
Resistivity
TOC
Flow Rate
Bacteria
Volumetric Dispense
2-2
TII Water System
RO Product Flow Rate
12 lph (3.2gph), ±15%
24 lph (6.3gph), ±15%
2
1
Tap
(Potable)
< 0.5 ppm
< 30 ppm
Recovery
10-20 %
20-40 %
Rejection
>90 %
>95 %
>99 %
>99 %
>99 %
ASTM Type II, >15 Megohm-cm
<15 PPB
Up to 1 LPM with a new D3750 final
filter
Less than 0.01 CFU/ml
Accuracy: ±5%, Repeatability: ±3%
Thermo Scientific