Installation
RO Membrane Installation
Carbon Filter Installation
Chlorine can also damage your membranes, resulting in premature membrane failure. Therefore,
your Thermo Scientific TII uses an extruded carbon filter to remove chlorine from your feed water.
Install the carbon filter as follows:
1. Remove the carbon filter (Part Number D502115) from its packaging and wet the o-rings with
water.
2. Insert the carbon filter straight into the right position upper and lower quick disconnect and
push until firmly connected. For easier installation, connect bottom first.
RO Membrane Installation
Figure 3-12 Schematic of the UV and RO Placement in the Thermo Scientific TII.
3-8
TII Water System
(a) is FEED, (b) is PRODUCT, and (c) is REJECT.
Thermo Scientific