Introduction
Section 3
It is the user's responsibility to read and to understand the contents of this
manual prior to installation and use of this equipment.
The manual contains the information you will need to install, operate and
maintain the E-pure cartridge deionization system.
The E-pure is designed to produce Type 1 reagent grade water equal to or
exceeding standards established by ASTM, CAP and NCCLS.
Careful attention to the following instructions will assure that the E-pure
runs properly and produces water to specification.
General Usage
Do not use this product for anything other than its intended usage.
Unpacking
Unpack the E-pure carefully. Ensure that all components are removed
prior to discarding packaging. The wall bracket can be removed and used
as a mounting template. Additional parts included with your unit, but not
attached to the unit are as follows:
1 - TU550X5 Tubing;
1 - 03039 Adapter, placed on tubing
3 or 4 - GSX28 O-rings.
Thermo Scientific
E-pure® Water Purification 3-1