Macro Mode; Portrait/Landscape Recordings; Taking Pictures - Silvercrest SCAW 5.00 B2 User Manual And Service Information

SilverCrest SCAW 5.00 B2

Macro mode

The camcorder features a macro function allowing you to focus on very close subjects. This
allows you to position the lens as close as 20-21 cm (8 inches) from the subject.
To enable macro mode, slide the Macro switch (10) to the
icon is shown on the display (17).

Portrait/landscape recordings

When recording subjects at distances of 1m or more, please use the Portait/landscape
setting. To do this, slide the macro switch (10) into the
icon is shown on the display (17).

Taking pictures


Open the display (17) and then rotate it to the position you require. The device
switches on automatically. The camcorder automatically initialises in Movie mode
automatically.

Press the Mode button (15) once to toggle to Photo mode.

The macro switch (10) lets you toggle between close-up recordings (macro mode)
and portrait/landscape captures

Use the zoom / volume adjustment button (3) to zoom in or out of the picture view.
Press the T zoom button (telephoto) to enlarge the subject or press the W zoom button
(wide-angle) to make it smaller.

Press the Record button (7) to take a picture. The power light (5) goes orange when
saving.
You can use the Photo menu to adjust picture quality settings like exposure
compensation or white balance. The settings are shown on the display (17).
Press the Menu button (14) to display the Photo menu. A detailed description can
be found on page 247.

In Photo mode, different icons may appear on the display (17) informing you about the
current settings. You can show or hide these icons and switch the display (17) on and
off by pressing the Display button (16).
214 - English
.
position. The macro mode
position. The portrait/landscape