Alternative Emulation For Kpdl Emulation - Kyocera Mita FS-C8008DN Operation Manual

3.6 Making Default Settings
3.6.3

Alternative Emulation for KPDL Emulation

12 12 12 12
To change the page size, press the ENTER key. A blinking question mark (?)
appears.
>KC-GL Page Set
? [A2]
13 13 13 13
Press the or
B1, B0, and SPSZ) appears. The SPSZ command sets the paper edge limits to the
dimensions of a standard paper size. See this command explained in the
Programming Manual in the CD-ROM. Press the ENTER key to set the page set you
just selected.
14 14 14 14
Press the MENU key. The display returns to Ready.
The auto KPDL [KPDL (AUTO)] emulation enables the printer to automatically change
the emulation mode according to the print job received. The emulation mode the printer
switches alternatively can be selected using the operator panel. The default alternative
emulation is HP PCL 6.
1 1 1 1
Press the MENU key.
2 2 2 2
Press the or
Emulation
PCL 6
3 3 3 3
Press the ENTER key. A blinking question mark (?) appears.
Emulation
?PCL 6
4 4 4 4
Press the or
key.
Emulation
?KPDL (AUTO)
5 5 5 5
Press the key. Press the
alternative emulation currently selected also appears — PCL 6 or KC-GL.
6 6 6 6
To change the alternative emulation, press the ENTER key. A blinking question
mark (?) appears.
>Alt. Emulation
?PCL 6
key repeatedly until the desired page size (A2, A1, A0, B3, B2,
key repeatedly until Emulation > appears.
>
key repeatedly until KPDL (AUTO) appears. Press the ENTER
or key until >Alt. Emulation is displayed. The
3-44