Error Messages - Lucent Technologies DEFINITY Administrator's Manual

Troubleshooting

Error Messages

If a problem has been encountered during the connection process,
an error message appears on the remote telephone. Table 4-2
shows the error messages and the suggested actions to take.
Table 4-2. Error Messages
Message
No Dial Tone
Line Busy
4-6
Issue 3 July 1997
Cause
The Remote Module
is not properly
connected to the local
telephone company.
The line that the
Switch Module is
connected to is
already in use.
Action
Connect a regular
telephone to the
telephone company jack,
and listen for dial tone.
Make sure the line is
properly connected to
the jack on the Remote
Module. If there still is
no dial tone, have the
local telephone company
check the line.
Verify that the correct
telephone number has
been programmed and
that no one else is using
the Switch Module the
remote user is calling.
Continued on next page