Lucent Technologies DEFINITY Administrator's Manual page 61

Password Programming
Table 2-2. Password Manager Menus and Commands (Continued)
Menu
Com Link
2-20
Issue 3 July 1997
Menu Commands
Set Logout Code
Description
Set the logout code for each
Rack-Mount Switch Module.
The logout code is used for
the DEFINITY ECS Terminal
Translation Initialization
(TTI) feature. If the
connection from the Remote
Module is lost, the Switch
Module automatically logs
the user out of the
DEFINITY ECS. The user
can then reconnect at the
same or a different port.
The logout code cannot
exceed 16 characters in
length. Only 15 different
characters may be used for
the code. These characters
include U, D, comma (,), 0,
1, 2,3, 4, 5, 6, 7, 8, 9, #, and
*. The U stands for the
receiver off-hook, the D
stands for the receiver on-
hook, and the comma
represents a two-second
delay. The remaining
characters represent the
numeric keypad on the
telephone.