Disconnecting - Lucent Technologies DEFINITY Administrator's Manual

Password Programming

Disconnecting

After you are finished programming the remote user passwords,
you must discontinue the operation of the Remote Module from the
Standalone Switch Module. Follow these steps:
1. From the Change Password screen, press
screen appears:
2. This "Disconnect" screen allows you to change your mind
before totally disconnecting. To disconnect, press
disconnect sequence appears on the display; after a few
seconds the "Go Online?" screen appears. This indicates you
are disconnected.
If you do not want to disconnect, go to Step 3 .
!
CAUTION
Be sure that you have completely logged off by waiting for
the "Go Online?" screen to appear. If you do not completely
log off, the Remote Module may continue to try to re-
establish the connection.
2-12
Issue 3 July 1997
:
1
until the following
2
. The