Lucent Technologies DEFINITY Administrator's Manual page 74

Password Programming
12. If you want to compare the currently programmed passwords
with the passwords uploaded in the Extender Rack, select
Verify Passwords from the Com Link menu. Any differences
from the currently displayed password file and the uploaded
passwords on the Extender Rack are displayed. The
information displayed includes the user number and the Switch
Module on which the difference exists.
13. To upload the programmed passwords and logout codes to the
Switch Modules you chose in Step 3, select Upload Passwords.
NOTE:
If you did not select any Switch Modules, the program displays
an error message advising you that no cards have been
selected. When you click on OK, the program automatically
displays the Card Selection window to allow you to select the
Switch Module(s) to which you want to upload passwords.
Follow the instructions in Step 4 to select the module(s).
14. When programming is complete, exit the Password Manager by
selecting Exit from the File menu.
Issue 3 July 1997
2-33