Administrator Window - Lucent Technologies DEFINITY Administrator's Manual

Password Programming
Figure 2-4. Administrator Window
7. Click on Okay or press ENTER.
Programming Remote User Passwords
Up to 100 passwords can be programmed into each Rack-Mount
Switch Module installed in the Extender Rack. This allows a
number of different remote users to access each individual Rack-
Mount Switch Module at different times. However, only one Remote
Module user can be connected to an individual Rack-Mount Switch
Module at any one time.
Each user (including the System Administrator) is assigned a user
ID consisting of the word "user" and ending with a two-digit user
number. The System Administrator ID is "user00." When you
assign a password, the Password Manager program automatically
adds two digits (00–99) to the beginning of the password that
correspond to the two-digit user ID number associated with the
password. A remote user cannot change his or her password. All
changes and additions must be done by you, the System
Administrator.
2-25
Issue 3 July 1997