Logging Into The Standalone Switch Module - Lucent Technologies DEFINITY Administrator's Manual

Password Programming
!
CAUTION
Do not plug the A/C adapters into a 240-vac outlet because
you will damage the adapter and the module. You must first
obtain an adapter to convert 240 vac to 120 vac.
7. The display on the telephone initializes and reads:
Logging Into the Standalone Switch
Module
Setting and changing passwords stored in the Switch Module must
be done through the Remote Module. Follow these steps to start
the operation of the Remote Module:
1. At the "Go Online?" screen, press
start the operation of the DEFINITY Extender system.
2. At this point, the Remote Module establishes the connection
with the Switch Module. Figure 2-1 shows the sequence of
messages that appear on the telephone display during
connection of the Extender system.
:
2
on the display telephone to
Issue 3 July 1997
2-5