Considerations; Password Programming - Lucent Technologies DEFINITY Administrator's Manual

Extender switch module

Hide thumbs Also See for DEFINITY:

Table of Contents

Considerations

Consider the following when programming the Switch Module:

Up to 100 passwords can be programmed into each Switch

Module.

Only one Remote Module at a time can be "on-line" with an

individual Switch Module.

Passwords are retained in non-volatile memory and are not

affected by power outages.

All passwords must contain 8 to 10 digits.

Each password begins with two digits (00–99). The 00

password is reserved for the system administrator and can be

used to change any of the remaining passwords.

2-2

Issue 3 July 1997

Table of Contents