Lucent Technologies DEFINITY Administrator's Manual page 54

Password Programming
3. If you do not want to disconnect, press
screen. The following screen appears:
4. Do one of the following:
Press
the system. The "Go Online?" screen appears, indicating
that the DEFINITY Extender system is no longer connected.
Press
by repeating Steps 2–7 under "Programming Remote User
Passwords" above.
5. Reset DIP switches 2 and 3 to your desired settings.
DIP switch 2
— OFF for standard telephone line
— ON for dedicated line
DIP switch 3
— OFF to not allow changing of password
— ON to allow changing of password
1
to return to the "Disconnect" screen and disconnect
2
to reconnect and continue to program passwords
3
at the "Disconnect"
Issue 3 July 1997
2-13