Setup Procedure; For Network Connection; For Local Connection - Konica Minolta bizhub press C7000 User Manual

2.4

Setup procedure

2.4 Setup procedure
To use this printing system, you must complete the setup in advance.
The setup refers to a series of procedures for connecting the machine to the computer and installing the print-
er driver to the computer.
Perform the setup using the following procedures.
2.4.1

For network connection

1
Connect this machine to the computer.
2
Check that the computer to be used is connected to the network.
3
Specify the IP address of this machine, and then connect it to the network.
4
Change the network settings for this machine according to the connection method or protocol.
% LPR: In [LPD Setting], enable LPD printing.
% Port9100: In [TCP/IP Settings], enable the RAW port number (initial setting: [9100]).
% SMB: Configure settings of [Print Settings] in [SMB Settings].
% IPP/IPPS: In [IPP Settings], enable IPP printing. To use IPPS printing, install the certificate in ad-
vance.
% Web Service Print: In [Web Service Settings], enable the print function.
% Bonjour: In [Bonjour Setting], enable Bonjour.
% AppleTalk: In [AppleTalk Settings], enable AppleTalk.
5
Install the printer driver.
% Specify the network port for the printer driver according to the connection method or protocol.
6
Install the screen fonts.
% The CD-ROM contains the European TrueType fonts as "screen fonts". The "Screen Font" or
"Screen Fonts" folder in the CD-ROM contains the screen fonts.
% Install the screen fonts using the standard function for the OS of adding fonts. For details, refer to
Help of the Operating System.
% Macintosh fonts are compressed. Decompress them before installing.
Reference
- After installing the printer driver, perform test print to make sure that the connections are made prop-
erly.
d
Reference
For details on the connectable interfaces, refer to page 2-7.
For details on the network settings, refer to [User's Guide - POD Administrator's Reference].
The procedure for installing the printer driver varies depending on the connection method, operating system
of the computer, and printer driver. For details, refer to page 3-2.
To update an existing printer driver, uninstall it first. For details, refer to page 8-2.
2.4.2

For local connection

1
Connect this machine to the computer.
2
Install the printer driver.
3
Install the screen fonts.
% The CD-ROM contains the European TrueType fonts as "screen fonts". The "ScreenFont" or
"Screen Fonts" folder in the CD-ROM contains the screen fonts.
% Install the screen fonts using the standard function for the OS of adding fonts. For details, refer to
Help of the Operating System.
bizhub PRESS C7000/C7000P/C6000/C70hc
2
2-8