Detailed Command Descriptions - GE MDS SD Series Reference Manual

ALARMS
ASIG
AUTH
122 SD Series Ref. Manual (Packet & Transparent Mode)

Detailed Command Descriptions

Displays the current alarm conditions by severity level. For each level,
the specific events that caused an alarm are listed, along with a brief
description of each alarm. Alarm levels are:
—All alarm classes
ALL
—Major alarm
MAJOR
—Minor alarm
MINOR
—Status Condition
STATUS
—Non-persistent information
INFORM
—Debug Events
DEBUG
=<choices> Alarm output signal state
Signal
—All clear
CLEAR
—Alarmed
ALARMED
=<choices> Alarm condition
Condition
—No alarms present
NONE
—Major alarm present
MAJOR
—Minor alarms present
MINOR
—Status conditions present
STATUS
=<string> Current alarm code (Hexadecimal)
Code
Used to view/configure alarm sense settings.
Optional arguments as follows:
=Set/clear mask by event.
CONFIG
=<choices> Alarm signal sense setting
ASENSE
—Active low
LOW
—Active high
HIGH
=<string>—Alarm signal mask (Hexadecimal)
AMASK
=<choices>—Set alarm signal mask by class
LEVEL
—Never assert alarm signal
NONE
—Assert signal on major alarm
MAJOR
—Assert signal on major or minor alarms
MINOR
—Assert signal on any alarm or status
ALL
Displays the list of authorized features, or changes the Authorization
Key that controls these features.
Optional arguments as follows:
MDS 05-4846A01, Rev. C