GE MDS SD Series Reference Manual page 85

Dumping (viewing)
Configuration File
Loading a
Configuration File
TFTP Setup
Parameters
MDS 05-4846A01, Rev. C
To save the radio's current configuration, proceed as follows:
1. Select
Save Current Configuration
2. A challenge message appears briefly, informing you that the previ-
ously saved configuration file (if any) will be overwritten by the
current one. Answer
3. The system saves the current file and returns to the Save/Restore
Configuration Menu.
To restore the radio's configuration to the last saved version, proceed
as follows:
1. Select
Restore Saved Config
2. A challenge message appears briefly, informing you that a reboot is
required if the operation is performed. Note that the radio's pass-
word will be reset to the factory default (
wish to proceed.
3. The system changes to the last saved version of the configuration
file.
The current configuration file can be viewed as follows:
1. Select
Dump/Load Config File
menu. The screen clears and the message
appears.
2. Press any keyboard character to immediately display the configura-
tion file on the screen. The file will likely fill more of the screen
than can be viewed at one time. Use the scroll bar at the right side of
the screen to view the entire file contents.
A configuration text file may be loaded as follows:
1. Select
Dump/Load Config File
that appears. The screen clears and the message
appears.
text file
2. Send the new configuration text file to the radio's
may be done by selecting
gram, or by performing a "paste" operation.
The TFTP Configuration File Menu (Figure 60) contains settable
parameters for TFTP file transfers and also selections for
Importing/Exporting configuration Files via TFTP. Each menu item is
reviewed below the figure, along with important information for using
each parameter.
SD Series Ref. Manual (Packet & Transparent Mode)
from the menu.
if you wish to proceed.
y
from the menu.
admin
and then
Dump Current Config
Press any key to start...
followed by
Load Config File
in the communications pro-
Send Text File
). Answer if you
y
from the
on the menu
Please send config
port. This
COM1
77