GE MDS SD Series Reference Manual page 135

ETHCONFIG
ETHPORT
ETHSTATS
HELP
IOSTAT
MDS 05-4846A01, Rev. C
Sets or displays the configuration of the Ethernet port. The port can be
set to a specific Ethernet address (static mode), or the address can be
determined automatically based on the first received packet (autoselect
mode). Optional arguments as follows:
—Ethernet MAC Address
MAC=<byte string>
RXTHRE=<unsigned 32 bits>
Used to display/configure Ethernet data support options. Optional argu-
ments as follows:
—Restore configuration
RESTORE
—Commit changes
COMMIT
—Enables or disables this configuration
Enable =<choices>
—Ethernet port disabled
OFF
—Ethernet port enabled
ON
—Specifies the type of socket to open
MODE=<choices>
—UDP socket
UDP
—TCP client socket
TCPCLIENT
—TCP server socket
TCPSERVER
TCPSERVERCLIENT
LOCALPORT=<ranged unsigned 16 bits>
—Minimum destination IP port for IP payload
0
—Maximum destination IP port for IP payload
65535
=<IP Address>—Remote IP address for IP payload
DEST ADDRESS
=<range unsigned 16 bits>—Destination Port for IP payload
DEST PORT
for IP payload. 0 (minimum) to 65535 (maximum).
KEEPALIVE=<number of seconds>
600 seconds
socket state
STATE=<string>
Display/clear Ethernet statistics. Optional argument as follows:
—Clears Statistics
CLEAR
Lists commands supported for the current user log-in level.
Displays various I/O statistics. Optional arguments as follows:
—Clear selected statistics
CLEAR
=<choices>—Selects I/O module
MODULE
SD Series Ref. Manual (Packet & Transparent Mode)
—Ethernet RX Rate Threshold
—TCP server/client socket
—Local IP port for IP payload
—Inactivity timer for TCP sessions, 0 to
127