GE MDS SD Series Reference Manual page 138

MENU
MULTIHOST
PACKET
PASSWORD
PERF
PING
130 SD Series Ref. Manual (Packet & Transparent Mode)
Changes user interface mode to radio's built-in menu.
Optional arguments as follows:
—Lin test timeout (ms)
ENABLE=<choices>
—Multihost off
OFF
—Multihost on
ON
TIMEOUT=<number of ms>
—Minimum timeout
0
—Maximum timeout
65535
—Packet Mode Enable
ENABLE=<choices>
—Packet off
OFF
—Packet on
ON
—Number of bytes to wait for a packet (
COM1GAP=<string>
—Number of bytes to wait for a packet (
COM2GAP=<string>
TIMEOUT=<ranged unsigned 16 bits>
—Minimum packet timeout (ms)
0
—Maximum packet timeout (ms)
1000
Sets the log-in password for the user at current access level or below.
Optional arguments:
—The log-in username to be associated with the password.
<username>
Performance information. Optional arguments as follows:
—Measured RF power output performance information
PWR=<string>
—Signal-to-noise performance information
SNR=<string>
—Received Signal Strength performance information
RSSI=<string>
—DC voltage level performance information
DC=<string>
—Internal temperature performance information
TEMP=<string>
PING test. Optional arguments as follows:
—Initiate Ping request
START
—Destination IP address
DESTIP=<IP address>
COUNT=<ranged unsigned 8 bits>
—Minimum value
1
—Maximum value
255
BYTES=<ranged unsigned 16 bits>
—Multihost Response Timeout
—Ethernet packet timeout
—Ping requests to send
—Data bytes in request
)
COM1
)
COM2
MDS 05-4846A01, Rev. C