GE MDS SD Series Reference Manual page 48

The Event Log Menu (Figure 32) is used to display all events stored by
the transceiver, even if the radio has been power-cycled. It also shows a
running total of alarms stored. Select to view stored events,
Show Log
and to erase all stored entries. For more information, see Page
Clear Log
94.
Figure 32. Event Log Menu
The submenu (Figure 33) allows viewing transmitted and
I/O Statistics
received bytes on any of the transceiver interface modules as selected by
the user. Available selections are: , , ,
COM1 COM2 Ethernet data port Remote
, , , , , ,
Reprogram Ethernet Interface Modem Drivers Miscellaneous All Data Link
, , and .
Layer Media Access Controller Port(s)
Once a module is selected, a summary of TX and RX bytes is presented,
along with the number of packets missed, retries, and number of blocks
(as applicable, depending on the interface selection). The display is con-
tinually refreshed to show the latest information, and may be cleared at
any time by selecting .
Clear Module Statistics
40 SD Series Ref. Manual (Packet & Transparent Mode) MDS 05-4846A01, Rev. C