GE MDS SD Series Reference Manual page 125

Standing Wave Ratio—See SWR.
Supervisory Control And Data Acquisition—See SCADA.
SWR—Standing Wave Ratio. A parameter related to the ratio between
forward transmitter power and the reflected power from the antenna
system. As a general guideline, reflected power should not exceed 10%
of the forward power ( 2:1 SWR).
Telnet—A terminal emulation protocol that enables an Internet user to
communicate with a remote device for management activities as if it
were locally connected to a PC.
Transparent Mode—A mode in which payload data is unchanged from
its original format when it is sent over the air. A radio in this mode is
said to be "transparent" to connected equipment at each end of a link.
TX—Abbreviation for "Transmit."
WAN—Wide Area Network
x710—The generic name for GE MDS legacy transceiver-family prod-
ucts, including the MDS 9710 (900 MHz), MDS 4710 (400 MHz), 2710
(200 MHz) and MDS 1710 (100 MHz).
MDS 05-4846A01, Rev. C SD Series Ref. Manual (Packet & Transparent Mode) 117