Cisco Unified IP Phone Non-Lockable Wall
Mount
This appendix contains information about installing the wall mount for use with the following products:
•
•
These nonlocking wall mount kits meet ADA 4.4.1 requirements.
ADA Non-Lockable Wall Mount Kit for 8961 Series and
9900 Series IP Phones
This section describes how to install the non-lockable wall mount kit on a Cisco Unified IP Phone 8961,
9951, and 9971 when the phone is not connected to a Key Expansion Module.
The following figure shows the wall mount kit installed on the phone.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
ADA Non-Lockable Wall Mount Kit for 8961 Series and 9900 Series IP Phones: Installed on the
Cisco Unified IP Phone 8961, 9951, and 9971.
ADA Non-Lockable Wall Mount Kit for 8961 Series and 9900 Series IP Phones plus a single Key
Expansion Module: Installed on the Cisco Unified IP Phone 8961, 9951, and 9971 with the Key
Expansion Module.
A P P E N D I X
F
F-1