Adjusting The Brightness Setting; Adjusting Auto Transmit Setting - Cisco 8961 Administration Manual

Chapter 5 Setting Up the Cisco Unified Video Camera
Select View Area.
Step 5
Use the arrows on the Navigation pad to increase or decrease the view area.
Step 6
Press the Save softkey.
Step 7

Adjusting the Brightness Setting

The Brightness setting affects the video that you transmit to others. However, it does not affect the video
that you receive from other parties. You can adjust the brightness setting to improve the quality of the
video during streaming.
Because the field of view can affect brightness, adjust the View Area feature for your camera before
Note
adjusting the Brightness setting.
To adjust the Brightness setting, follow these steps:
Procedure
On the Cisco Unified IP Phone, press the Applications button
Step 1
Select Accessories.
Step 2
Highlight Cisco Unified Camera.
Step 3
Press the Set-up softkey.
Step 4
Select Brightness.
Step 5
Use the arrows on the Navigation pad to increase or decrease brightness.
Step 6
Press the Save softkey.
Step 7

Adjusting Auto Transmit Setting

The Auto Transmit feature allows you to control the streaming of videos for both inbound and outbound
calls.
When Auto Transmit is on (default setting), the camera streams video automatically during calls.
When Auto Transmit is off, video for each call is automatically muted (however, your phone still
receives video). To resume video transmission in this case, press the Unmute Video softkey
To turn the Auto Transmit setting on or off, follow these steps:
Procedure
On the Cisco Unified IP Phone, press the Applications button
Step 1
Select Accessories.
Step 2
Highlight Cisco Unified Camera.
Step 3
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
Adjusting the Camera Settings
.
.
.
5-3