Installing the Wall Mount for Cisco Unified IP Phone 8961, 9951, and 9971
Attach the phone bracket to the IP Phone
Step 2
Detach the handset cord (and headset cord, if there is a headset), power cord, and any other attached
a.
cords from the base of the phone.
Remove the label covers that are concealing the screw holes.
b.
Attach the phone bracket by inserting the tabs into the mounting tabs on the phone. The ports of the
c.
phone should be accessible through the holes in the bracket.
Secure the phone bracket to the IP Phone with the machine screws.
d.
Thread the handset cord (and headset cord, if using one). Reattach the cords and seat them in the
e.
clips incorporated into the phone body.
Figure E-3
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
E-4
Appendix E
(Figure
Attaching the Phone Bracket
Screw holes
Installing the Wall Mount for the Cisco Unified IP Phone
E-3).
Slot for
mounting tabs