Cisco 8961 Administration Manual page 143

Chapter 8 Configuring Features, Templates, Services, and Users
Table 8-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description
Do Not Disturb (DND) When DND is turned on, either no audible rings
occur during the ringing-in state of a call, or no
audible or visual notifications of any type occur.
You can configure the phone with a phone-button
template with DND as one of the selected features.
The following DND-related parameters are
configurable in Cisco Unified Communications
Manager Administration:
EnergyWise Enables an IP Phone to sleep (power down) and
wake (power up) at predetermined times, to
promote energy savings
External Call Control Allows Cisco Unified Communications Manager
to route audio and video calls to a route server that
hosts routing rules.
The route server receives routing requests from
Cisco Unified Communications Manager and in
turn returns routing directives to Cisco Unified
Communications Manager.
Fast Dial Service Allows a user to enter a Fast Dial code to place a
call. Fast Dial codes can be assigned to phone
numbers or Personal Address Book entries. (See
"Services" in this table.)
Forced Authorization Requires a user to enter an authorization code to
Code place a call. Controls the types of calls that certain
users can place.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
Do Not Disturb—This check box allows you
•
to enable DND on a per-phone basis. Use
Cisco Unified Communications Manager
Administration > Device > Phone > Phone
Configuration.
DND Incoming Call Alert—Choose the type
•
of alert to play, if any, on a phone for incoming
calls when DND is active. This parameter is
located on both the Common Phone Profile
window and the Phone configuration window
(Phone Configuration window value takes
precedence).
BLF Status Depicts DND—Enables DND
•
status to override busy/idle state.
Telephony Features Available for the Cisco Unified IP Phone
Configuration Reference
For more information, go to the
Disturb" chapter in the Cisco Unified
Communications Manager Features and
Services Guide.
For more information, see
EnergyWise on the Cisco Unified IP Phone,
page 9-8.
For more information, see the Cisco Unified
Communications Manager Features and
Services Guide, "External Call
chapter.
For more information, see
Button Template for Personal Address Book or
Speed Dials, page 8-30.
For more information, see
Authorization Codes, page 8-39
Pattern Configuration section of the Cisco
Unified Communications Manager
Administration Guide.
"Do Not
Enabling
Control"
Modifying a Phone
Setting up Forced
and the Route
8-11