Cisco 8961 Administration Manual page 150

Telephony Features Available for the Cisco Unified IP Phone
Table 8-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description
Quality Reporting Tool Allows users to use the Report Quality feature
(QRT) button or softkey on a phone to submit information
about problem phone calls. QRT can be configured
for either of two user modes, depending upon the
amount of user interaction desired with QRT.
Redial Allows users to call the most recently dialed phone
number by pressing the Redial softkey.
Remote Port Allows the administrator to configure the speed
Configuration and duplex function of the phone Ethernet ports
remotely by using Cisco Unified CM
Administration. This enhances the performance for
large deployments with specific port settings.
Note
Ring Tone Setting Identifies ring type used for a line when a phone
has another active call.
Ringtone Users can customize how their phone indicates an
incoming call and a new voice mail message.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
8-18
If the ports are configured for Remote Port
Configuration in Cisco Unified CM, the
data cannot be changed on the phone.
Chapter 8 Configuring Features, Templates, Services, and Users
Configuration Reference
For more information see:
Cisco Unified Communications Manager
•
System Guide,
chapter.
Cisco Unified Communications Manager
•
Features and Services Guide,
Report Tool" chapter.
Requires no configuration.
For more information, see
Port Configuration, page
For more information see:
Cisco Unified Communications Manager
•
Administration Guide,
Number Configuration"
"Creating Custom Phone Rings" section
•
on page 9-2.
For more information, go to the
Phone Rings" chapter in the Cisco Unified
Communications Manager Features and
Services Guide.
"Cisco Unified IP Phone"
"Quality
Setting up Remote
8-40.
"Directory
chapter.
"Custom