Appendix; D Basic Phone Administration Steps; Example User Information For These Procedures - Cisco 8961 Administration Manual

Basic Phone Administration Steps
This appendix provides minimum, basic configuration steps for you to do the following:
•
•
•
•
The procedures provide one method for performing these tasks and are not the only way to perform these
tasks. They are a streamlined approach to get a new user and corresponding phone running on the system.
These procedures are designed to be used on a mature Cisco Unified Communications Manager system
where calling search spaces, partitions, and other complicated configuration are already done and are in
place for existing users.
This section contains these topics:
•
•
•
•

Example User Information for these Procedures

In the procedures that follow, example are given when possible to illustrate some of the steps. Sample
user and phone information used throughout these procedures includes:
•
•
•
•
•
•
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
Add a new user to Cisco Unified Communications Manager Administration
Configure a new phone for that user
Associate that user to that phone
Complete other basic end-user configuration tasks
Example User Information for these Procedures, page D-1
Adding a User to Cisco Unified Communications Manager, page D-2
Configuring the Phone, page D-3
Performing Final End User Configuration Steps, page D-6
User's Name: John Doe
User ID: johndoe
Phone model: 9971
Protocol: SIP
MAC address listed on phone: 00127F576611
Five-digit internal telephone number: 26640
A P P E N D I X
D
D-1