Modifying A Phone Button Template For All Calls; Modifying A Phone Button Template For Personal Address Book Or Speed Dials; Setting Up Pab Or Speed Dial As An Ip Phone Service - Cisco 8961 Administration Manual

Modifying Phone Button Templates
To modify a phone button template, choose Device > Device Settings > Phone Button Template in
Cisco Unified Communications Manager Administration. To assign a phone button template to a phone,
use the Phone Button Template field in the Cisco Unified Communications Manager Administration
Phone Configuration window. See Cisco Unified Communications Manager Administration Guide and
Cisco Unified Communications Manager System Guide for more information.
The default Cisco Unified IP Phone 9971 template that ships with the phone uses buttons 1 and 2 for
Note
lines.

Modifying a Phone Button Template for All Calls

We recommend that you provision an All Calls button for users with multiple shared lines. When you
configure an All Call button on the phone, you enable the users to do the following:
•
•
•
To add the All Calls button, you must modify the phone button template and then assign the template to
the phone.
Modifying a Phone Button Template for Personal Address Book or Speed
Dials
You can modify a phone button template to associate a service URL with a programmable button. Doing
so provides users with single-button access to the PAB and Speed Dials. Before you modify the phone
button template, you must configure PAB or Speed Dials as an IP Phone service.

Setting up PAB or Speed Dial as an IP Phone service

To configure PAB or Speed Dial as an IP Phone service (if it is not already a service), follow these steps:
Procedure
From Cisco Unified Communications Manager Administration, choose Device >Device Settings >
Step 1
Phone Services.
The Find and List IP Phone Services window displays.
Click Add New.
Step 2
The IP Phone Services Configuration window displays.
Enter the following settings:
Step 3
•
•
•
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
8-30
Press the All Calls button to displays a consolidated list of current calls from all lines on the phone.
Press the All Calls button under Call History to displays a list of all missed calls from all lines on
the phone.
Place a call on the users primary line when the user goes off-hook. All Calls automatically defaults
to the users primary line for any outgoing call.
Service Name and ASCII Service Name—Enter Personal Address Book.
Service Description—Enter an optional description of the service.
Service URL
Chapter 8 Configuring Features, Templates, Services, and Users