Cisco 8961 Administration Manual page 198

Status Menu
Table 10-6
Item
Sender Packets
Avg Jitter
Max Jitter
Rcvr Discarded
Rcvr Lost Packets
Rcvr Size
Sender Size
Sender Frames
Sender Partial Frames
Sender IFrames
Sender Frame Rate
Sender Bandwidth
Sender Resolution
Rcvr Frames
Rcvr Partial Frames
Rcvr IFrames
Rcvr IFrames Req
Rcvr Frame Rate
Rcvr Frame Errors
Rcvr Bandwidth
Rcvr Resolution
Sender Start Time
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
10-14
Chapter 10 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Video Statistics Items for the Cisco Unified Phone (continued)
Description
Number of RTP video packets transmitted since video stream opened.
This number is not necessarily identical to the number of RTP
Note
video packets transmitted since the call began because the call
might have been placed on hold.
Estimated average RTP packet jitter (dynamic delay that a packet
encounters when going through the network), in milliseconds, observed
since the receiving video stream opened.
Maximum jitter, in milliseconds, observed since the receiving video
stream opened.
Number of RTP packets in the receiving video stream that were
discarded (bad packets, too late, and so on)
Missing RTP video packets (lost in transit)
Size of video frames, in milliseconds, in the receiving video stream
(RTP streaming video).
Size of video frames, in milliseconds, in the transmitting video stream.
Number of video frames transmitted by the camera/phone since the
video stream opened.
Number of P-frames sent by the camera, since the video stream opened.
Number of I-frames sent by the camera, since the video stream opened.
Rate at which video frames are transmitted. (Frames per second).
Bandwidth of the video steam that is transmitted, in kbps (kilo bits per
second).
Resolution of the video stream transmitted by the camera.
VGA(640x480), CIF (352x288), QCIF (176x144)
Number of video frames received by the phone since the video stream
opened.
Number of P-frames received by the phone, since the video stream
opened.
Number of I-frames received by the phone, since the video stream
opened.
Number of times IDR requests sent by the phone to the remote end
point, since the video stream opened.
Rate at which video frames are received. (Frames per second).
Number of errors reported by video decoder, since the video stream
opened.
Bandwidth of the video steam that is received, in kbps (kilo bits per
second).
Resolution of the video stream received by the phone from the remote
end point. VGA(640x480), CIF (352x288), QCIF (176x144), etc.
Timestamp indicating when the first RTP packet is sent to the network.