Connecting The Footstand - Cisco 8961 Administration Manual

Chapter 3 Setting Up the Cisco Unified IP Phone

Connecting the Footstand

If your phone is placed on a table or desk, connect the footstand to the back of the phone.
Figure 3-8
footstand to the phone, align the tabs to the appropriate set of holes on the phone and snap into place.
Figure 3-8 Cisco Unified IP Phone 8961, 9951, and 9971
2
1
1
2
1
Insert the curved connectors into the lower slots.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
illustrates the footstand on the Cisco Unified IP Phone 8961, 9951, and 9971. To attach the
2
1
1
2
2
Lift the footstand until the connectors snap into the upper slots.
Note
Connecting and disconnecting the footstand requires a
little extra force than you might expect.
Connecting the Footstand
3-19