Cisco 8961 Administration Manual page 14

Chapter 3, "Setting Up the Cisco Unified IP Phone"
Chapter 4, "Setting Up the Cisco Unified IP Color
Key Expansion Module"
Chapter 5, "Setting Up the Cisco Unified Video
Camera"
Chapter 6, "Understanding the VoIP Wireless
Network"
Chapter 7, "Configuring Settings on the Cisco
Unified IP Phone"
Chapter 8, "Configuring Features, Templates,
Services, and Users"
Chapter 9, "Customizing the Cisco Unified IP
Phone"
Chapter 10, "Viewing Model Information, Status, and
Statistics on the Cisco Unified IP Phone"
Chapter 11, "Monitoring the Cisco Unified IP Phone
Remotely"
Chapter 12, "Troubleshooting and Maintenance"
Appendix A, "Providing Information to Users Via a
Website"
Appendix B, "Supporting International Users"
Appendix C, "Technical Specifications"
Appendix D, "Basic Phone Administration Steps"
Appendix E, "Installing the Wall Mount for the
Cisco Unified IP Phone"
Appendix F, "Cisco Unified IP Phone Non-Lockable
Wall Mount"
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
xii
Describes how to properly and safely install the Cisco Unified IP
Phone on your network. Also provides procedures on how to
configure and add accessories, such as Bluetooth wireless headsets,
USB headsets, and analog wideband headsets, to the Cisco Unified
IP Phone.
Describes how to connect and configure supported Key Expansion
Modules for the Cisco Unified IP Phone.
Describes how to configure the Cisco Unified Video Camera and add
it to the Cisco Unified IP Phone (Cisco Unified IP Phone 9951 and
9971 only).
Provides an overview and describes the setup of the wireless local
area network (WLAN), which the Cisco Unified IP Phone 9971
supports.
Describes how to configure network settings, verify status, and make
global changes to the Cisco Unified IP Phone.
Provides an overview of procedures for configuring telephony
features, configuring directories, configuring phone button and
softkey templates, setting up services, and adding users to Cisco
Unified Communications Manager.
Explains how to customize phone ring sounds and the phone idle
display at your site.
Explains how to view model information, status messages, network
statistics, and firmware information from the Cisco Unified IP
Phone.
Describes the information that you can obtain from the web page for
the phone to remotely monitor the operation of a phone and to assist
with troubleshooting.
Provides tips for troubleshooting the Cisco Unified IP Phone and the
Cisco Unified IP Phone Expansion Modules.
Provides suggestions for setting up a website for providing users
with important information about their Cisco Unified IP Phones.
Provides information about setting up phones in non-English
environments.
Provides technical specifications of the Cisco Unified IP Phone.
Provides procedures for basic administration tasks such as adding a
user and phone to Cisco Unified Communications Manager and then
associating the user to the phone.
Contains instructions for installing the wall mount for the Cisco
Unified IP Phone.
Contains instructions for installing the Cisco Unified IP Phone
Non-Lockable Wall Mount.
Preface