Upgrading the Key Expansion Module
Upgrading the Key Expansion Module
To automatically upgrade KEMs to the latest load, follow these steps:
Procedure
Power on the KEM, press Page 1, and do not release. When the LCD turns white, continue pressing Page
Step 1
1 for at least one second.
Release Page 1; LEDs should turn red. Immediately press Page 2 and continue pressing Page 2 for at
Step 2
least one second.
Release Page 2; all LEDs should turn amber.
Step 3
Press Lines 5, 14, 1, 18, 10, and 9 in sequence.
Step 4
The LCD should turn blue, and the spinning loader is displayed in the center.
The KEM starts to upgrade.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
4-6
Chapter 4
Setting Up the Cisco Unified IP Color Key Expansion Module