Cisco 8961 Administration Manual page 181

Chapter 9 Customizing the Cisco Unified IP Phone
The user can wake up the phone by pressing the Select key. At the scheduled wake time, the system
restores power to the phone, waking it up.
Table 9-2
EnergyWise settings. You configure these fields in Cisco Unified Communications Manager
Administration in the Product Specific configuration window, by choosing Device > Phone.
Table 9-2
Field
Enable Power Save Plus Selects the schedule of days for which the phone powers off. Select multiple
Phone On Time
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
explains the Cisco Unified Communications Manager Administration fields that control the
EnergyWise Configuration Fields
Description
days by pressing and holding the Control key while clicking on the days for
the schedule.
By default, no days are selected.
When Enable Power Save is checked, you receive a message to warn about
emergency (e911) concerns.
To disable Power Save Plus, you must uncheck the Allow
Note
EnergyWise Overrides check box. Leaving the Allow EnergyWise
Overrides checked with no days selected in the Enable Power Save
Plus field does not disable Power Save Plus.
Determines when the phone automatically turns on for the days selected in
the Enable Power Save Plus field.
Enter the time in this field in 24 hour format, where 00:00 is midnight.
For example, to automatically power up the phone at 7:00 a.m. (0700), enter
7:00. To power up the phone at 2:00 p.m. (1400), enter 14:00.
The default value is blank, which means 00:00.
The Phone On Time must be at least 20 minutes later than the Phone
Note
Off Time. For example, if the Phone Off Time is 7:00, the Phone On
Time must be no earlier than 7:20.
Enabling EnergyWise on the Cisco Unified IP Phone
While Power Save Plus Mode (the "Mode") is in
Caution
effect, endpoints configured for the mode are
disabled for emergency calling and from receiving
inbound calls. By selecting this mode, you agree to
the following: (i) You are taking full responsibility
for providing alternate methods for emergency
calling and receiving calls while the mode is in effect;
(ii) Cisco has no liability in connection with your
selection of the mode and all liability in connection
with enabling the mode is your responsibility; and
(iii) you fully inform users of the effects of the mode
on calls, calling and otherwise.
9-9