Cisco 8961 Administration Manual page 262

Installing a Wall Mount for a Phone with a Key Expansion Module
Attach the phone to the wall bracket by inserting the tabs on the top of the phone bracket into the slots
Step 5
on the wall bracket. Ensure that the power cord and any other cable that does not terminate in the wall
behind the bracket are positioned in one of the cable-access openings in the bottom of the bracket. The
phone and wall brackets' openings together form circular openings with room for one cable per opening
(Figure
Use the locking key to lock the phone to the wall bracket.
Step 6
Figure E-12
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
E-14
E-12).
Attaching the Phone to the Wall Bracket
Appendix E Installing the Wall Mount for the Cisco Unified IP Phone