Configuring Features; Setting Up Automatic Port Synchronization; Setting Up Bluetooth Profiles - Cisco 8961 Administration Manual

Chapter 8 Configuring Features, Templates, Services, and Users
•
•
•

Configuring Features

This section contains additional procedures for setting up some of the phone features.

Setting up Automatic Port Synchronization

To configure the parameter in the Cisco Unified CM Administration application, choose Device >
Phone, select the appropriate IP Phones, and scroll to the Product Specific Configuration Layout pane.
To configure the setting on multiple phones simultaneously, enable Automatic Port Synchronization in
the Enterprise Phone Configuration (System > Enterprise Phone Configuration).

Setting up Bluetooth Profiles

For more information, see Cisco Unified Communications Manager Administration Guide.
Go to Cisco Unified CM Administration > Device > Phone.
Step 1
Find your phone from the list of phones associated with the Cisco Unified CM.
Step 2
Click on the Device Name of the phone.
Step 3
The Phone Configuration window appears.
Step 4
Go to Product Specific Configuration Layout area and from the Bluetooth Profiles drop-down list box,
Step 5
choose the applicable profile.
The Handsfree profile is selected by default.
Check the "Override Common Settings" check box for any setting in Product Specific Configuration
area that you wish to update.
•
•
If you set these same parameters in these other windows too, the setting that takes precedence is
determined in the following order:
1.
2.
3.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
Show All Settings—All call forward settings display on the User Options web pages (default).
Hide All Settings—No call forward settings display on the User Options web pages.
Show Only Call Forward All—Only call forward all calls displays on the User Options web pages.
If you do not check this check box, the corresponding parameter setting does not take effect.
Parameters that you set in the Product Specific Configuration area may also appear in the Device
Configuration window for various devices and in the Enterprise Phone Configuration window.
Device Configuration window settings,
Common Phone Profile window settings
Enterprise Phone Configuration window settings.
Configuring Features
8-37