Modifying A Phone Button Template For Personal Address Book Or Speed Dials - Cisco 6921 Administration Manual

Chapter 5 Configuring Features, Templates, Services, and Users
•
To avoid confusion for users, do not assign a feature to a button and a softkey at the same time.
For more information about softkey templates, see

Modifying a Phone Button Template for Personal Address Book or Speed Dials

You can modify a phone button template to associate a service URL with a line button. Doing so enables
users to have single-button access to the PAB and Speed Dials. Before you modify the phone button
template, you must configure PAB or Speed Dials as an IP phone service.
To configure PAB or Speed Dial as an IP phone service (if it is not already a service), follow these steps:
Procedure
Step 1 From Cisco Unified Communications Manager Administration, choose Device >Device Settings >
Phone Services.
The Find and List IP Phone Services window displays.
Step 2 Click Add New.
The IP Phone Services Configuration window displays.
Step 3 Enter the following settings:
•
•
•
•
•
•
Step 4 Click Save.
You can add, update, or delete service parameters as needed as described in the
Services
To modify a phone button template for PAB or Fast Dial, follow these steps:
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)
OL-19025-01
The default Cisco Unified IP Phone 6961 template that ships with the phone uses buttons 1 through
12 for lines.
Service Name and ASCII Service Name—Enter Personal Address Book.
Service Description—Enter an optional description of the service.
Service URL
For PAB, enter the following URL:
http://<Unified CM-server-name>:8080/ccmpd/login.do?name=#DEVICENAME#&service=pab
For Fast Dial, enter the following URL:
http://<Unified-CM-server-name>:8080/ccmpd/login.do?name=#DEVICENAME#&service=fd
Service Category—Select XML Service.
Service Type—Select Directories.
Enable—Select the check box.
Configuration" chapter in the Cisco Unified Communications Manager Administration Guide.
Note If you change the service URL, remove an IP phone service parameter, or change the name
of a phone service parameter for a phone service to which users are subscribed, you must
click Update Subscriptions to update all currently subscribed users with the changes, or
users must resubscribe to the service to rebuild the correct URL.
Modifying Phone Button Templates
Configuring Softkey Templates, page 5-16.
"Cisco Unified IP Phone
5-15