Vertical Wave User Manual page 75

Hold
To Reconnect to a Call on Hold
ANALOG PHONES
Place the current call on hold while you use other phone features.
To Place a Call on Hold
With a party on the line:
1.
2.
3.
Reconnect to a Call on Hold
1.
2.
To End a Call Without Losing Your Call(s) on Hold
You can use the Hold feature to end 1 call without losing other calls that may be on hold for you.
1.
2.
Release 3.0
Press the line or call appearance button that corresponds to the call that was
placed on hold.
or,
Press the TAP button to retrieve the most recently held call.
If more than one call has been placed on hold, and the phone is not currently
Hint:
connected on a call, you can press the HOLD button repeatedly to scroll through all the
calls currently on hold. When the desired call is shown on the display, press TAP to
retrieve that one.
Press FLASH, then #, then *64.
or,
Press FLASH, then 7.
Listen for two beeps.
Hang up.
Listen for the dial tone.
Press *65, then #.
Hint: If you are on a call, you may use the Toggle method to switch between the two active
calls.
Press Flash, then 3 to end the current call.
If you hung up, pick up the phone.
Press Flash, then 4 to re-connect to the call still on hold.
If you have multiple calls on hold, you will hear a menu from which you can select the
call to which you want to connect
Wave Phone User Guide
Using Wave Phone Features
April 2012
-
3 41