Vertical Wave User Manual page 25

Using a Wave Phone
Obtain Information for Your Phone
You can access a prompt that tells you your extension number and station ID.
To Hear the Prompt
Note:
1.
2.
Using a Phone Other than Your Own
If you use another user's phone to place calls, you are subject to that user's dialing restrictions,
outgoing Caller ID information, and other settings, and your calls are logged as being from that
user. To make sure that your calls are placed and logged as yourself, do the following:
ANALOG PHONES
1.
Once you are logged on:
2.
When you are finished placing calls at the other user's phone:
3.
Note:
automatically.
DIGITAL AND SIP PHONES
Using the * Options
When you press
options include redialing and/or returning the last call as described below:
Hint:
To Redial the Last Call You Placed
To Return a Call to Your Last Identified Caller
You cannot return calls that do not have a specific caller ID.
Release 3.0
If you are using a digital phone, you can skip step 1 below.
Press the line or SPEAKER button to get a dial tone.
Press *00 to activate the prompt.
Log into your account from that phone (# <your extension> # <your password> #
Press to forward your calls to that phone.
5 1
Press to log off.
*0 0
If the phone is idle for too long (for example, more than an hour) you may be logged off
Log into voicemail and forward calls to 'this' extension logs you in.
at a dial tone, the system offers you a menu of feature code commands. These
*
Refer to Chapters 4 through 6 for a list of * options available on your specific phone type.
Press .
*25
Press .
*69
Wave reads the number it will dial and prompts you to approve it before it dials the call.
Wave Phone User Guide
-
2 5
Basic Operation
).
April 2012