Vertical Wave User Manual page 50

Call Waiting
SIP PHONES
The L2 button on each model serves as the call waiting indicator. Also, models 480i/CT and
9480i/CT has two softkeys:
Pressing the
call (and place the existing call on hold). However, pressing the
incoming call directly to voicemail.
To accept a call waiting call
To reconnect to the initial call
To release the call waiting call
While the Call Waiting call is active, press End Call.
Release 3.0
sofkey button is equivalent to the L2 button; it will connect you to the new
PICKUP
Press L2 (or the
PICKUP
5).
The initial call is placed on temporary hold. The corresponding primary line button LED
blinks, and the L2 LED lights (solid).
Remember, on models 480i/CT, 9480i/CT, and Aastra Series 5 you can also press
Hint:
Ignore to send the incoming call directly to voicemail.
Press your primary line button.
The call that was waiting is placed on temporary hold. The Call Waiting LED flickers,
and the corresponding primary line LED lights.
You can toggle back and forth between the initial call and the call waiting call by pressing
the primary line button and the Call Waiting button. The LEDs and display update to
reflect which caller is connected.
• For models 480i/CT, 9480i/CT, and all Aastra Series 5: press Goodbye (
the softkey.
DROP
The call waiting call is dropped and you are reconnected to the initial call.
and
PICKUP IGNORE
softkey on models 480i/CT, 9480i/CT & Aastra Series
Wave Phone User Guide
Using Wave Phone Features
.
softkey sends the
IGNORE
-
3 16
or use
April 2012