Vertical Wave User Manual page 130

Vertical SIP Phones 480i/CT and 9480i/CT
Unpairing Handset from the Base Station
Unpairing of the handset can be done from either the cordless handset or the base station.
Caution:
the functions in the Feature button will be removed.
Note:
performed locally on the handset, and the unpairing procedure will need to be completed from
the base station. To avoid this situation, when unpairing make sure that handset and base station
are within three feet of each other.
On the 480i/CT and 9480i/CT base station:
1.
2.
3.
4.
5.
6.
On the 480iCT and 9480iCT Cordless Handset:
7.
8.
9.
Release 3.0
Unpairing of the handset will return it to factory default state. All data including
If the handset to be unpaired is out of range from the base station, the unpairing is only
Place the handset being unpaired within three feet of its base station.
On the handset, press Options to access the options list.
Scroll down the list of options.
Select
HSET PAIRING
Select .
REMOVE
Note: If the handset has not been previously paired to the base station, you will not be able
to select the
REMOVE
Select .
DONE
"Attempting to remove..."
When removal is successfully completed,
display. If unsuccessful,
If pairing is unsuccessful, repeat the steps above (making sure base station and handset
are within three feet of each other), then perform the following additional steps:
Press .
Select
HSET PAIRING
If the handset has not been paired to the base, you will not be able to select the
Note:
option.
Remove
Select .
REMOVE
"Attempting to remove..."
When removal is successfully completed,
base station and handset displays. If unsuccessful,
is unsuccessful, repeat the steps above making sure base station and handset are located
within three feet of each other.
.
option.
will appear on the handset display during the process.
"Removal successful"
will appear.
"Pairing failed"
on the handset display.
will appear on the handset display during the process.
"Removal successful"
Wave Phone User Guide
About Wave SIP Phones
will appear on the base
will appear on both the
will appear. If pairing
"Pairing failed"
-
5 10
April 2012