Vertical Wave User Manual page 69

Forward Calls
To Forward Calls to External Phone Numbers
1.
2.
3.
4.
To Cancel Call Forwarding (Internal/External)
Using Forward (Follow-me)
From any phone in the system, you can specify an extension to which you want your calls
forwarded.
Example: You go to work in a lab room and want all calls forwarded to that room, but have forgotten
1.
2.
3.
If you are prompted for a password:
4.
Release 3.0
Press the pre-programmed User Forward button. If your phone does not have a
programmed User Forward button, dial *43.
Enter the external access digit(s).
The digit that allows you access to an external phone line (usually a 9).
Enter the phone number to which you want to forward calls.
If you enter an international phone number, you must enter a # at the end of the number.
If you are prompted for a password, enter your Voicemail password, then press #.
You will hear two beeps, and
LED behavior.
Note: When you go off hook you receive "stutter" dial tone to indicate your phone is in a
special state.
EXCEPTION:
On a digital phone, password re-entry may fail when forwarding your calls to an
external number, because the incorrect password is not cleared first.
Workaround: Hang up and retry the forwarding process again, making sure to enter
your password correctly.
Press the pre-programmed User Forward button. If your phone does not have a
programmed User Forward button, dial *44 to cancel call forwarding.
If the User Forward button's red LED was flashing or solid, it goes off.
to set the forward prior to leaving your office. You can pick up the phone in the lab and set
it for the Follow-me forward. All calls to your office phone will then ring in the lab (until
you cancel the setting).
Listen for the dial tone.
Press *78.
Enter the destination extension.
Enter the appropriate voicemail password.
is displayed. See above for the button's expected red
FWD
Wave Phone User Guide
Using Wave Phone Features
April 2012
-
3 35