Vertical Wave User Manual page 45

Call Park
DIGITAL PHONES
To System Park a Call
While on a call:
1.
2.
To Retrieve a Call Parked on the System
From any extension:
1.
2.
ANALOG PHONES
To System Park a Call
With a party on the line:
1.
2.
3.
1.
2.
Release 3.0
Press the pre-programmed System Park button.
If your phone does not have a programmed System Park button, press Flash, then *62 to
park a call.
Listen for two short beeps, and hang up.
The display shows the parking slot number where the call is parked. Be sure that you
remember this number since you'll need to use it to retrieve the call.
The System Park red LED remains lit until the parked call is retrieved.
If you leave a call parked for a long period of time, your phone rings back, and
displayed.
While a call is parked from your phone, and the System Park button's red LED is
Note:
lit, you can query the parking slot of the last call parked from your phone by pressing
, then the System Park button.
MENU
Press the pre-programmed System Park button.
If your phone does not have a programmed System Park button, dial *63.
Dial the parking slot number at which the call was parked.
Press Flash, then *62.
Listen for two beeps.
Hang up.
Or,
With a party on the line, press Flash, then 6.
Listen to the system prompt for the slot number.
Wave Phone User Guide
Using Wave Phone Features
PARK
April 2012
-
3 11
is